Solid State Logic SSL 2+ MKII User Manual page 34

SSL 2+ MKII User Guide – SSL Support
CV is an abbreviation of "Control Voltage"; an analogue method of
controlling synthesizers, drum machines and other similar equipment.
What are CV Tools?
CV Tools is a free pack of CV-enabled instruments, synchronisation tools,
and modulation utilities that enable users to seamlessly integrate Ableton
Live with various devices in the Eurorack format or Modular Synthesisers &
Analog effects units.
Setting Up Ableton Live CV Tools
Open your Ableton Live session
First set up a new Audio Track that you'll use to send out the CV
Signal.
Then insert onto the Audio track a CV Utilities Plug-In from the packs
menu.
Once the CV Utility Plug-In is Open, set the CV To to your designated
Output. In this example, we've set this to Output 3/4 from the SSL 2+
MKII.
Set up a second Audio track with the input signal from the
Effect/Instrument and record arm to monitor the input back into
Ableton Live.
ow using the CV Value knob on the CV Control channel, you can
automate the CV signal sent out of Ableton to your External
Instrument/FX unit. This can then be mapped to a MIDI controller to
control in realtime, record the Automation into your session, or like
here assign the CV to an LFO.
Now you can record the audio back into your Ableton Session, or
other DAW you may be using to record your Audio back onto your
system.
Please note that multiple CV Utility plugs can be set up when using
the SSL 2+ MKII as EVERY PHYSICAL OUTPUT is able to send DC
signal for CV Control. Therefore you can use up to 8 CV control
signals at any one time using CV Tools and an SSL 2+ MKII
https://cdn.printfriendly.com/assets/client/algo-6f51604695c926a5083000e22d39f39d7a7d79d42d7b84f2593ec5ba06aae02c.html
06/09/2024, 17:03
Page 34 of 38