Advertisement
SSL 2+ MKII User Guide – SSL Support
Monitoring Section
This section describes the controls found in the monitoring section. These
controls affect what you hear through your monitor speakers and the
headphone output.
MIX (Top-Right Control)
This control directly affects what you hear coming out of your monitors and
headphones. When the control is set to the left-most position labelled
INPUT, you will hear only the sources you have connected to Channel 1
and Channel 2 directly, without latency.
If you are recording a stereo input source (e.g. a stereo keyboard or synth)
using Channels 1 and 2, press the STEREO switch so that you hear it in
stereo. If you are only recording using one Channel (e.g. a vocal recording),
make sure that STEREO is not pressed, otherwise, you will hear the vocal
in one ear!
https://cdn.printfriendly.com/assets/client/algo-6f51604695c926a5083000e22d39f39d7a7d79d42d7b84f2593ec5ba06aae02c.html
06/09/2024, 17:03
Page 17 of 38
Advertisement
Need help?
Do you have a question about the SSL 2+ MKII and is the answer not in the manual?
Questions and answers
I have the SSL2+ - Can I use it to playback session audio to a client using say Zoom or Microsoft Teams or Whereby.com etc.? I do Voiceovers and use Soundforge 15 as my DAW