Solid State Logic SSL 2+ MKII User Manual page 24

SSL 2+ MKII User Guide – SSL Support
top red LEDs blink whilst phantom power is applied. The audio will be
muted for a few seconds. Once phantom power has been engaged,
proceed with steps 2 and 3 like
before.
Keyboards and Other Line-Level Sources
• Plug your keyboard/line-level source into INPUT 1 or INPUT 2 on the rear
panel using a jack
cable.
• Follow Steps 2, 3 & 4 on the previous page to set your levels for recording.
https://cdn.printfriendly.com/assets/client/algo-6f51604695c926a5083000e22d39f39d7a7d79d42d7b84f2593ec5ba06aae02c.html
06/09/2024, 17:03
Page 24 of 38