Solid State Logic SSL 2+ MKII User Manual page 26

SSL 2+ MKII User Guide – SSL Support
CAUTION! If you are using a microphone, and monitoring the INPUT be
careful about turning the MONITOR LEVEL control up because this can
cause a feedback loop if the microphone is close to your speakers. Either
keep the monitor control at a low-level or monitor through headphones.
Monitoring Your DAW
If you wish to blend the playback of your DAW with your input for low
latency monitoring you can use the Mix control to blend the Input signal and
DAW playback.
1. First, ensure that the DAW INPUT channel is muted to avoid doubling the
signal in your headphones.
2. Secondly, turn the MIX control to listen to a balance of the signals, finding
a suitable level for each for comfortable levels.
https://cdn.printfriendly.com/assets/client/algo-6f51604695c926a5083000e22d39f39d7a7d79d42d7b84f2593ec5ba06aae02c.html
06/09/2024, 17:03
Page 26 of 38