View Devices Currently On The Network - NETGEAR Nighthawk RS200 User Manual

Nighthawk WiFi 7 Dual-Band Router Model RS200, Model RS150v1
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED.
The ADVANCED Home page displays.
The page displays panes for the router, Internet port, WiFi networks, and guest WiFi
networks.
The information on this page uses the following color coding:
• Green icon: The Internet connection is fine and no problems exist. For a WiFi
network, the network is enabled and secured.
• Red icon: Configuration problems exist for the Internet connection. For a WiFi
network, the network is disabled or down.
• Amber icon: The Internet port is configured but cannot get an Internet connection
(for example, because the cable is disconnected), a WiFi network is enabled but
unprotected, or another situation requires your attention.

View devices currently on the network

You can view all devices that are currently connected to your network. If you are using
VPN, you can also view the remote devices that are connected to your router through
VPN.
To view devices on the network:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Attached Devices.
The following information is displayed:
• Status: Displays only if network access control (see Network access control list
on page 54) is enabled. The field displays if a device is allowed or blocked.
• Connection Type: Either wired or the WiFi band for the connection
• Device Name: The device name, if known
Manage and Monitor Your
Router
125 User Manual