Log In To The Router After You Set Up The Router - NETGEAR Nighthawk RS200 User Manual

Nighthawk WiFi 7 Dual-Band Router Model RS200, Model RS150v1
• Make sure that the computer is connected to one of the Ethernet LAN ports on
the router or over WiFi to the router.
• Make sure that the router is receiving power and that its Power LED is lit.
• Close and reopen the browser or clear the browser cache.
• Browse to http://www.routerlogin.net.
• If the computer is set to a static or fixed IP address (this setting is uncommon),
change it to obtain an IP address automatically from the router.
• Use the Reset button, to reset the router to factory default settings (see Use the
Reset button on page 140).
5. Scroll down and click the If you don't have a compatible smartphone, click here
link.
A welcome page displays.
6. Follow the onscreen instructions.
The router detects your Internet settings.
7. Follow the onscreen instructions to complete the installation process.
If the router does not detect the Internet settings, the installation assistant cannot
complete the installation process, and you must start the installation process again:
1. Before you start again, review your settings. Make sure that you select the correct
options and type everything correctly.
2. If the router still does not detect the Internet settings, contact your ISP to verify that
you are using the correct configuration information.
3. If problems persist, register your router and contact NETGEAR Technical Support.
Log in to the router after you set up the
router
When you set up your router while the router is in factory default state, the browser
automatically starts the NETGEAR installation assistant.
After you set up the router, if you want to view or change settings for the router, you
can use a browser to log in to the router web interface.
To log in to the router web interface:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
Connect to the Router Network
and Access the Router
25 User Manual