Table of Contents
Advertisement
Nighthawk AXE7300 Tri-Band WiFi 6E Router Model RAXE290
View devices currently on the network
You can view all computers and devices that are currently connected to your network.
To view devices on the network:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Attached Devices.
The following information is displayed in the table:
• Status: Displays only if network access control (see Network access control list
on page 50) is enabled. The field displays if a device is allowed or blocked.
• Connection Type: Wired or the WiFi band for the connection.
• Device Name: If the device name is known, it is shown here.
The following information is displayed when Dynamic QoS is disabled (which it is
by default):
• IP Address: The IP address that the router assigned to this device when it joined
the network. This address can change if a device is disconnected and rejoins the
network.
• MAC Address: The unique MAC address for each device does not change. The
MAC address is typically shown on the product label of the device.
The following information is displayed if you enable Dynamic QoS (see Enable
Dynamic QoS on page 113):
• Internet Download Speed by Device: The last measured Internet download
speed of the device in Mbps.
• Internet Upload Speed by Device: The last measured Internet upload speed
of the device in Mbps.
Manage Your Router
127
User Manual
Advertisement
Table of Contents
