Monitor, Meter, And Control Internet Traffic - NETGEAR Nighthawk RS200 User Manual

Nighthawk WiFi 7 Dual-Band Router Model RS200, Model RS150v1
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED.
The ADVANCED Home page displays.
5. In the Internet Port pane, click the Show Statistics button.
The Show Statistics pop-up window displays and shows the following information:
• System Up Time: The time elapsed since the router was last restarted.
• Port: The statistics for the WAN (Internet) port, LAN (Ethernet) ports, and WLANs
(WiFi networks). For each port, the window displays the following information:
○ Status: The link status of the port.
○ TxPkts: The number of packets transmitted on this port since the router was
last started.
○ RxPkts: The number of packets received on this port since the router was last
started.
○ Collisions: The number of collisions on this port since the router was last
started.
○ Tx B/s: The average (outbound) bandwidth used on the WAN and LAN ports
since startup, in bytes per second.
○ Rx B/s: The average reception (inbound) bandwidth used on the WAN and
LAN ports since startup, in bytes per second.
○ Up Time: The time elapsed since this port acquired the link.
• Poll Interval: The interval at which the statistics are updated on this page.
6. To change the polling frequency, enter a time in seconds in the Poll Interval field
and click the Set Interval button.
7. To stop the polling entirely, click the Stop button.
Monitor, meter, and control Internet
traffic
Traffic metering allows you to monitor the volume of Internet traffic that passes through
the router Internet port. With the traffic meter utility, you can set limits for traffic volume,
set a monthly limit, and get a live update of traffic usage.
Manage and Monitor Your
Router
130 User Manual