NETGEAR Nighthawk RS200 User Manual page 172

Nighthawk WiFi 7 Dual-Band Router Model RS200, Model RS150v1
4. Select ADVANCED > Advanced Setup > VPN Service.
The VPN Service page displays.
5. Make sure that the Enable VPN Service check box is selected.
For more information about the VPN configuration for the router, see Enable
OpenVPN service on the router on page 164.
6. Scroll down to the Clients will use this VPN connection to access section, and select
the Home Network only radio button.
This is the default setting. The VPN connection is only to your home network, not to
the Internet service for your home network.
7. Click the Apply button.
Your settings are saved.
Use OpenVPN to Access Your
Network
172 User Manual