NETGEAR Nighthawk RS200 User Manual page 14

Nighthawk WiFi 7 Dual-Band Router Model RS200, Model RS150v1
1
2
3
4
5
6
7
8
Figure 2. Top view
Table 1. LED descriptions
LED and Button
1. Power LED
2.
Internet LED
Hardware Setup
Description
Solid white: The router is ready.
Solid amber and then blinking amber: The Reset button was pressed. When
you first press the Reset button, the LED lights solid amber. After 5 seconds, the
LED turns blinking amber, and the router resets to factory defaults.
Off: Power is not supplied to the router.
Solid white: The Internet connection is ready.
Solid amber: A cable was plugged into the port, but the Internet connection is
not yet ready.
Blinking: The port is sending or receiving traffic.
Off: No Ethernet cable is connected between the router and the modem.
14 User Manual