Kyocera KM-8030 Operation Manual page 9

DF-650, MT-1(A), BF-1(A), PH-4A AND PH-4C OPERATION GUIDE
WARNING:
If anything harmful (paper clips, water, other fluids, etc.) falls into
this product, turn OFF (O) the copier's main power switch immediately, remove the
copier's power plug from its outlet and contact your service representative. If you
continue to use this product without taking these steps, there is a danger of fire or
electrical shock.
WARNING:
ALWAYS contact your service representative for maintenance or
repair of internal parts.
CAUTIONS
CAUTION:
For safety purposes, ALWAYS turn OFF (O) the copier's main
power switch and remove the copier's power plug from its outlet when performing
cleaning operations on this product.
CAUTION:
DO NOT touch the ejection tray when the product is in operation as
there is a danger of injury.
CAUTION:
If dust accumulates within this product, there is a danger of fire or
other problems. It is therefore recommended that you consult with your service
representative in regard to cleaning of internal parts. This is particularly effective if
performed prior to seasons of high humidity. Consult with your service representative
in regard to the cost of cleaning the internal parts of the product.
Other Precautions
DO NOT place heavy objects on this product or cause other damage to the product.
When lifting or moving the product, contact your service representative.
Do not touch electrical parts, such as connectors or printed circuit boards. They
could be damaged by static electricity.
DO NOT attempt to perform any operations not explained in this Operation Guide.
English
1-5