Kyocera KM-8030 Operation Manual page 21

5
6
7
8
9
DF-650, MT-1(A), BF-1(A), PH-4A AND PH-4C OPERATION GUIDE
Remove the new staple cartridge from its
box.
Holding the staple cartridge holder in one
hand and the new staple cartridge in the
other, insert the staple cartridge into the
holder.
Ensure the direction of insertion is correct.
Both arrows should point in the same
direction.
Ensure the new staple cartridge is inserted
completely into the staple cartridge holder,
then peel off the paper tape.
Re-install the staple cartridge holder.
The staple cartridge holder will click into
place when it has been inserted correctly.
Push the internal tray back into position and
close the front cover.
English
1-17