Kyocera KM-8030 Operation Manual page 22

English
1
2
3
4
5
1-18
Emptying the Waste Hole Punch Box
If the message "Empty waste punch box" displays, the scraps in the waste hole
punch box require emptying.
Leave the main power switch on your copier switched ON ( | ) while performing this
procedure.
Grasp the front cover handle and open the
front cover.
Grasp the waste hole punch box handle and
remove the box from the Document
Finisher.
Dispose of the hole punch scraps
appropriately.
Re-install the waste hole punch box. Align it
with the guides in the Document Finisher.
Close the front cover.
DF-650, MT-1(A), BF-1(A), PH-4A AND PH-4C OPERATION GUIDE