Staple Mode - Kyocera KM-8030 Operation Manual

4
5
1
2
DF-650, MT-1(A), BF-1(A), PH-4A AND PH-4C OPERATION GUIDE
Copies are ejected onto the specified tray.
If Tray A is selected, each stack can be
offset from the previous stack. Refer to the
Operation Guide for your copier for further
details.
If Tray A and Tray B both reach their
maximum capacity, a message displays.
Remove all copies from both trays to
continue.
NOTE:
The maximum number of copies that can be stored on Tray A and Tray B
differs depending on the size of copy paper being used. For further information refer
to Tray Capacity on page 1-32. If the number of copies to be made at one time in
Non-Sort Mode exceeds the maximum capacity for Tray B (200 sheets), all copies
thereafter are ejected onto Tray A.
On completion of the job, remove the copies.

Staple Mode

Sorts and staples each copy set.
Stapling options are as follows:
• Upper Left Single Staple
• Upper Right Single Staple
• Double Staple
NOTE:
For stapling specifications, refer to Staple Unit on page 1-32.
Select Sort: On Mode on the operation panel of your copier.
Select the staple setting required.
A
B
C
D
A A
B
B
C
C
D
D
A
B
C
D
A A A A
A A A A
A A A
A A A
English
1-9