Figure 3.12: Commands Dialog Box - Avocent DSR2020 Installer/User Manual

Figure 3.12: Commands Dialog Box

3. Select Scan Enable in the Commands dialog box.
4. Click X to close the Commands dialog box.
NOTE: Scanning will begin as soon as the Scan Enable button is selected.
To cancel Scan mode:
Select a target device if the OSCAR interface is open.
-or-
Move the mouse or press any key on the keyboard if the OSCAR interface is not open. Scanning
will stop at the currently selected target device.
-or-
If the OSCAR interface is not open, press
a. Click Commands. The Commands dialog box appears.
b. Clear Scan Enable.
Chapter 3: Local Port Operation
The Main dialog box will appear.
Print Screen.
29