Tape Playback; Basic Operations - Aiwa CX-N4000 U Operating Instructions Manual

BASIC OPERATIONS
3
DOLBYNR
~NR
4
DIR/PRESET
u
1
2
3
4
Press the TAPE button.
The power is turned on and the button lights in red.
If a tape is inserted
You can turn the unit on and begin playback by pressing the
TAPE button (direct play function).
Open the cassette holder by pressing theA EJECT
mark and insert a tape exposed side down.
Push the cassette holder to close it.
Set DOLBY NR to match the playback tape.
For tapes recordedwith DOLBY NR,
press the DOLBY NR
button to turn on DKi NR.
For tapes recorded without DOLBY NR, press the DOLBY
NR button to turn off 00 NR.
Press the <- button to start playback.
Playback starts from the side facing you.
To select a reverse mode+
Each time the REV MODE button is pressed, the reverse mode
changes.
To play one side only, turn on 1.
To play both sides once only, turn on ~>.
To play both sides repeatedly, turn on c=>.
To stop playback
.Press the button.
To pause
Press the 11 button.
The [[ button flashes.
To resume play, press it again.
To fast forward or rewind
In stop mode, press the<+ DOWN or *E UP button.
To stop fast forward or rewind, press the button.
38