Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for djpower TOPCAT H-SIP7 SNOWSTORM
Summary of Contents for djpower TOPCAT H-SIP7 SNOWSTORM
-
Page 2: Before You Begin
The information and specifications contained in this User Manual are subject to change without notice. DJPOWER assumes no responsibility for any errors or omissions and reserves the right to revise or create this manual at any time. Copyright © 2024 DJPOWER. All rights reserved. - Page 3 Personal Safety 1.5.1 • Always connect the product to a grounded circuit to avoid the risk of electric shock. • The machine is for adults only, and keep children out of reach of the machine! 1.5.2 Mounting and Rigging In order to prevent the snow fluid from splashing onto the ground after the snow disperse, causing the ground to be slippery.
- Page 4 Adjustable snow output by manual control, timing and quantitative control, wireless remote control, DMX control, etc. In order to achieve the best effect, please only use DJPOWER high-quality snow liquid. Different types of snow liquid can produce different effects. For details, please refer to the consumables introduction or consult the business personnel.
- Page 5 Product Overview 机器尺寸 - 4 -...
-
Page 6: Technical Specification
3 TECHNICAL SPECIFICATION Voltage AC 100-120V 50/60HZ AC 220-240 V, 50/60 Hz AC power Breaker data 15A/250V 8A/250V Total Power 1,050 W 1,050 W Capacity Tank capacity IP Rate IP Rate IP53 Adjustable Output √ Max Distance Appr. 20 m ( Under windless conditions) Output Max Output Coverage 50 ㎡（placed on the indoor floor in 45°）... -
Page 7: Installation Notes
After checking that all the parts are intact and complete, place the machine on a flat surface with at least 50 cm of space around the machine. • Pour DJPOWER high-quality snow fluid into the tank, taking care not to fold the tube. Damage caused by the use of other liquids is not covered by the warranty. •... -
Page 8: Lcd Control
<ENTER> Confirm/Exit, reuse the "STOP" key MENU page Press FUNCTION button, there are 12 pages as below: Value LCD display Description Range DJPOWER H- SIP7 Start-up screen Software version V1.0 DJPOWER H- Display the voltage used by the machine SIP7... - Page 9 Press “▲”or “▼” to set the output Duration Set 5-999 S duration under the TIMER mode setting. Snow Volume Out Press “▲”or “▼” to set the snow output 0-100% 100% volume(the increasing range is 5% each time) Press “▲”or “▼” to set the blower Blower Speed 0-100% 100%...
- Page 10 ① "Interval 5s": interval timing; ② "Interval 10s": interval timing; The above pages will be displayed cyclically, and the time (such as 5s) is based on the currently set value (the settings of the interval setting and duration setting). In the timing mode, the snow output is controlled by "Snow Volume out".
-
Page 11: Dmx Operation
LCD controller flashes twice, it means that a wireless transmitter has been recognized. If the backlight does not flash, it needs to be re-recognized. ② One wireless transmitter controls two or more machines. Power on two machines at the same time. When the LCD controller of the two machines display "Wireless Setup", press any key of the wireless transmitter. -
Page 12: Machine Storage
Excessive dust, fluid residue on the machine will degrade the machine’s performance and cause poor heat dissipation. Remove dust from the machine with air compressor, vacuum cleaner or soft brush. The casing could be cleaned by the damp cloth. Test-run your DJPOWER ®H-SIP7 on a monthly basis to achieve the best performance. Storage Storage Machine Before storing the machine, clean it and empty the fluid tank.
Need help?
Do you have a question about the TOPCAT H-SIP7 SNOWSTORM and is the answer not in the manual?
Questions and answers