Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for djpower WP-2
Summary of Contents for djpower WP-2
- Page 1 Bubble Fogger WP-2 USER MANUAL...
-
Page 2: Safety Instructions
WP-2 Bubble Fog Machine 1. Safety Instructions • This device is only for use in closed rooms (not outdoors). • The warranty claim expires if the device is modified by the user. • The device may only be repaired by trained specialists. - Page 3 WP-2 Bubble Fog Machine establish the correct electrical connection. All electrical and mechanical connections must be installed in accordance with European safety standards 1.1. Intended use of the device This device is a device that was developed for professional use on stages, in discotheques, theatres, etc.
-
Page 4: Overhead Mounting
WP-2 Bubble Fog Machine Never drink the fog fluid. If it did happen, contact a doctor immediately. If the fluid comes into contact with the eyes and mucous membranes, rinse the areas immediately with water. Only operate the device in a horizontal position. - Page 5 WP-2 Bubble Fog Machine • Review in the scope of the acceptance test at least every four years by an expert. • Inspection by an expert at least once a year How to proceed with overhead attachment: Ideally, the device should be installed outside of the area where people are.
- Page 6 WP-2 Bubble Fog Machine 2. Connection 2.1.1. Electrical Connection Connect the device to the mains using the supplied power cable! The protective earth must always be connected! Cable (EU) Cable (US) International Brown Black Live Blue White Neutral Green/ Yellow...
- Page 7 This is the only way to ensure safe operation, proper use and a long service life for the device. The Bubble Fog WP-2 is an effect machine with patented DJ Power technology, which can create fog-filled soap bubbles. The WP-2 is designed in such a way that unused soap bubble fluid is returned to the appropriate tank and therefore cannot drip onto the floor.
-
Page 8: Product Description
WP-2 Bubble Fog Machine 3.3. Product description 8 / 16... -
Page 9: First Time Setup
WP-2 Bubble Fog Machine 4. First time setup ATTENTION! Before using the device for the first time, remove all packaging materials. 1. After checking that the device is intact and complete, please place it on a flat surface. 2. Fill the tanks with fluid! Please only use the recommended fluids, otherwise the device may be damaged and the guarantee will be void. - Page 10 WP-2 Bubble Fog Machine 4.1.1. Menu Menü Value Function Here you can set the interval for the timer Interval Set 5 – 200s function. Here you can set the ejection duration for Duration Set 5 – 200s the timer function.
-
Page 11: Led Green
WP-2 Bubble Fog Machine LED RED LED OFF dimmer function LED GREEN LED OFF dimmer function LED BLUE LED OFF dimmer function LED AMBER LED OFF dimmer function LED MIXING LED OFF COLOR dimmer function LED STROBE STROBE OFF Strobe Speed... -
Page 12: Technical Data
WP-2 Bubble Fog Machine 5. Technical data Tension AC 220V-240V; 50/60Hz Power consumption max. 650W Fuse 5A/250V Warm-up time About 3 minutes LEDs 6x 8W RGBA/ 15° beam angle Tank volume 1.3 liters (bubble tank) 1.3 liters (Haze Tank) Output volume 128 m³/min... -
Page 13: Cleaning And Maintenance
WP-2 Bubble Fog Machine 5.1. Cleaning and maintenance To avoid clogging of the machine, the machine should be cleaned after 40 hours of use. For this purpose, 35% vinegar is mixed with 65% distilled water and the machine is triggered 10-15 times. - Page 14 WP-2 Bubble Fog Machine Notes: 14 / 16...
- Page 15 WP-2 Bubble Fog Machine Notes: 15 / 16...
- Page 16 WP-2 Bubble Fog Machine Importer: B&K LUMITEC 2 rue Alfred Kastler Zone Industrielle 67850 Herrlisheim - France +33 (0) 3.88.96.80.90 +33 (0) 3.88.96.48.46 hello@bklumitec.com www.bklumitec.com 16 / 16...
Need help?
Do you have a question about the WP-2 and is the answer not in the manual?
Questions and answers