1. Safety instructions This device is suitable for indoor use only. All modifications to the device will void the warranty. Repairs are to carry out by skilled personnel only. Use only fuses of the same type and original parts as spare parts. ...
Important: Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems. Make sure the electrical connection is carried out by qualified personnel. All electrical and mechanical connections have to be carried out according to the European safety standards.
3. Unpacking Open the shipping packing and check whether all the necessary accessories to operate the unit have arrived complete and intact. The shipping packing should contain the following items: 1. One unit of DSK-2000 smoke machine 2. Power cord 3.
Page 6
3. When LCD displays “Ready TO Fog”, press “FUNCTION” button three times, then the LCD shows “Timer Out”. In this situation, user can adjust the smoke output volume in the Timer mode (the ranges from 1% to 100%) by “UP/DOWN”buttons. When LCD displays s “Ready TO Fog”, press “TIMER”...
10. When the heating process is completed and ready to fog, the status of wireless function and fluid sensor can be seen on the display of the LCD screen as follows: When the wireless function is on, LCD displays “Ready To Fog W” (W means wireless) When the fluid sensor is on, LCD displays “Ready To Fog S”...
5. DMX This fog machine has a built-in DMX. It uses 1 channel to control volume output. This channel has a value range from 0 to 255. Timer functions such as duration and interval can be programmed using the dmx controller, or the dmx control software operated by the lighting and effects personnel. If channel A has values from 0 to 5, the unit is off.
Need help?
Do you have a question about the DSK 2000 and is the answer not in the manual?
Questions and answers