Ingenico Link 2500 Device Set Up

Tebra Payments Terminal: Setup Device
|
Once the terminal device
offers a reliable and secure in-person payments solution that supports chip, swipe, and contactless payments.
Available for Tebra Payments
Terminal Device Setup
Tebra offers two different terminal devices:
corresponding device to set up the terminal.
Ingenico Link 2500
Before getting started, ensure the package includes the
terminal, installation guide, a USB-C to USB A cable,
wall adapter and a battery pack.
For detailed instructions and troubleshooting, refer to the
complete user guide provided with your card reader.
1. Place the Ingenico Link 2500 near an electrical
outlet, away from heat, dust, and electromagnetic
radiations.
2. Connect one end of the USB-C cable to the
terminal and the other end to a power source. For
the first charge, let it charge for at least four hours.
Note: Subsequent charges will be quicker.
3. After the battery is charged, press and hold the
green button on the keypad to turn on the terminal.
Look for the triPOS logo on the display.
is received, complete the device setup and
activated practices.
Ingenico Link 2500
https://helpme.tebra.com/Platform/Practice_Settings/Tebra_Payments/Tebra_Payments_Terminal%3A_Setup_Device
pair the device to Tebra. Your terminal device
and Ingenico Lane 3600. Follow the instructions for the
Updated: Fri, 22 Nov 2024 07:23:30 GMT
1