Ingenico Link 2500 Device Set Up page 2

4. Once it displays triPOS, enter the Admin access
code: 0001. The Admin Menu screen displays.
5. Configuring Network Settings:
a. Select 1-Communication Type. Then,
select WiFi.
b. Press the yellow button to go back to the
previous menu and select 2-WiFi
Parameters. Then, select Scan Networks.
c. Choose your network, enter the password,
and press the green button to connect.
Note: If the password includes special
characters, press the button on the bottom
left of the touch screen to access special
characters.
d. Press the yellow button to go back to the
previous menu and select My Networks.
Verify the network is connected.
6. Advanced Setup: If applicable, assign a Static IP:
a. Select 2-WiFi Parameters. Then, select
Default IP Configuration.
b. Turn off DHCP by selecting DHCP
activation > Off and confirm by pressing the
green enter key.
c. Enter the Static IP and subnet mask provided
by your IT team, confirming each by pressing
the green enter key.
7. Press the yellow button until the prompt to save the
settings and to restart the device.
8. Unplug the device. Then, press and hold the #
button and the yellow button simultaneously until
the device restarts.
9. Once the device restarts and finishes loading, the
activation code displays on the screen. The
Ingenico Link 2500 is
https://helpme.tebra.com/Platform/Practice_Settings/Tebra_Payments/Tebra_Payments_Terminal%3A_Setup_Device
ready to pair with Tebra.
Updated: Fri, 22 Nov 2024 07:23:30 GMT
2