Ingenico Link 2500 Device Set Up page 3

Ingenico Lane 3600
Before getting started, ensure the package includes the
terminal, installation guide, power supply unit, and
cables specific to the practice's connectivity
requirements.
For detailed instructions and troubleshooting, refer to the
complete user guide provided with your card reader.
1. Place the Ingenico Lane 3600 upside down near
an electrical outlet, away from heat, dust, and
electromagnetic radiations.
2. Connect the power cable and an ethernet cable to
the back of the card reader. Then, connect the
corresponding cable to the power supply unit.
Caution: Avoid using any other power supply to
prevent damage.
3. Plug in the power supply into an electrical outlet.
The Ingenico Lane 3600 powers on and is
pair with Tebra.
Pair Terminal Device
Once the Terminal Device has an internet connection, pair the device in the Tebra web platform.
https://helpme.tebra.com/Platform/Practice_Settings/Tebra_Payments/Tebra_Payments_Terminal%3A_Setup_Device
ready to
Updated: Fri, 22 Nov 2024 07:23:30 GMT
3