JVC DR-M10S Instructions Manual page 61

Jvc dr-m10s: instruction manual
Hide thumbs Also See for DR-M10S:
Table of Contents

Advertisement

E
Set the following recording options as
required.
A Press w e to select the desired option.
B Press rt to select the desired setting, then press
ENTER.
"REC MODE" (
pg. 58, "Recording Speed") (
"Free Rate Function"), "DAILY/WEEKLY" (
"Daily/Weekly Rec Function"), "NAME" (
"Modify Program Name"), and "STOP" (To advance/go
back the stop time by 30 minutes, press and hold rt).
F
Access the confirmation screen.
Press ENTER.
G
Complete timer programing.
Press ENTER.
To program another timer, repeat steps B – G.
If "PROGRAM OVERLAPPED" appears on the TV screen, see
"When programs overlap each other" (
H
Engage the unit's timer mode.
Press # (TIMER). The unit turns off automatically and
"#" appears on the front display panel.
To disengage the timer mode, press # (TIMER) again.
IMPORTANT
If you have moved to a different area or if a broadcasting
station's channel number has been changed, the wrong
channel number will be displayed on the VCR Plus+ program
screen in step C. When this happens, set the correct Guide
Channel number for that station. (
Timer Programing")
pg. 59,
pg. 61,
pg. 76,
pg. 70).
pg. 60, "VCR Plus+
®
NOTES:
There may be cases that VCR Plus+ Timer Programing function
prolongs the stop time of the programing.
When two successive programs are recorded on a DVD-RW
disc with VCR Plus+ Timer Programing function, the beginning
of the second one may be left off the recording.
VCR Plus+ Timer Programing is not possible on the discs used
exclusively for On-Disc Timer Programing.
If the copy limited program is received during timer-recording,
the unit enters Record Pause mode. Recording starts again if it
is switched to a recordable broadcast during the time you
programed.
Cable Box or DBS Receiver Users
To timer-record a satellite broadcast using the VCR Plus+
system:
A Perform "Cable Box Control Setting" (
Receiver Control Setting" (
B Perform "VCR Plus+
®
Timer Programing".
C Leave the Cable Box or DBS receiver's power on.
Daily/Weekly Rec Function
You can record programs with one of the following weekly/daily
timer settings.
WEEKLY
Select to record a weekly program.
MON–FRI
Select to record a daily program from
Monday through Friday.
MON–SAT
Select to record a daily program from
Monday through Saturday.
SUN–SAT
Select to record a daily program from Sunday
through Saturday.
61
EN
pg. 29) or "DBS
pg. 32).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dr-m10Drm10s

Table of Contents