Table of Contents
Advertisement
D
Enter the receiving channel position number.
A Press rt to select "DVD CH", then press ENTER.
B Press rt to select the number of the unit's channel
position on which the Guide Channel number's
broadcast is received by the unit or the DBS receiver.
Then press ENTER.
To timer-record a satellite program with the VCR Plus+ system,
you need to install a supplied Controller and perform the
procedure described in "Cable Box Control Setting"
(
pg. 29) or "DBS Receiver Control Setting" (
Repeat steps C and D as necessary.
E
Complete the setting.
Press SET UP.
Guide Channel Number
"Guide Channel (GUIDE CH) number" refers to the assigned
TV station numbers, according to broadcast area, for the VCR
Plus+ timer recording. The Guide Channel numbers can be
found in most TV listings.
pg. 32).
63
EN
Advertisement
Table of Contents
