Table of Contents
Advertisement
34
Resume Function
It is possible to memorise the position where you stop playback
and resume playback from that position.
1
Memorise a resume point.
Press 8 during playback.
The unit enters Resume Stop mode and memorises the position
where you have stopped playback as a resume point.
(The inside of the disc status indicator on the front display
panel blinks while memorising.)
To clear the resume points:
(The inside of the disc status indicator stops blinking and
lights.)
• Press 1 to turn off the unit.
• Press x to take out the disc.
• Press 8 in stop mode.
• Press TOP MENU to display the top menu, then start
playback by selecting an item, etc.
• Press MENU to display the disc menu, then start playback by
selecting an item, etc.
2
Resume playback.
Press 4 in stop mode. The unit starts playback from the
resume point.
PLAYBACK OPERATIONS (cont.)
Marking positions to play again later
It is possible to mark positions (up to 999 points) where you
want to play back once again later, and start playback from a
marked position. Marking onto DVD-RAM/RW/R discs when
recording is helpful to locate a start point when you play back
the discs later.
1
Mark positions.
During playback, press
MARK at positions you want
to mark.
"MARK" appears on the TV
screen. You can easily locate
the marked positions using
2 or 6 when you play
back the disc.
2
Delete the marked positions.
While paused, press 2 or
6 to locate a marked
position you want to delete,
then press MARK.
Crossed "MARK" appears on
the TV screen, and the marked
position is deleted.
NOTES:
When a monaural programme or bilingual programme
changes to a stereo programme while recording, a mark signal
is automatically recorded.
When a DVD-R/RW (Video mode) disc is finalised, marked
points marked before finalising will be deleted, and
programmes will be divided automatically into "chapters"
approximately every 5 minutes. (
Checking the disc remaining time
You can change the counter display on the front display panel
and TV screen to check disc remaining time (only discs before
finalising).
During playback
Each press of DISPLAY changes the display as follows:
Clock time (front display panel only) ] Current title elapsed
time ] Disc remaining time ] (back to the beginning)
Clock time is displayed only when a recordable disc is played.
In stop mode or during playback
It is possible to check disc remaining time according to
recording modes also by pressing REMAIN.
In FR mode, it is possible to set recording time in detail using
w e. (
pg. 55, "Free Rate Function")
It is not possible to switch the recording mode during playback
or while recording.
pg. 107, "Finalise a disc")
Advertisement
Table of Contents
