Table of Contents
Advertisement
Shooting
Backup Rec (continued)
1
Set [Slot Mode] in the [Main Menu]B[Record Set] menu to
Backup . (A Page 64)
A BACKUP display appears on the status display screen.
BACKUP Display
STATUS 1 Screen
2
Start backup recording. (Backup recording in slot B)
● Select [REC] in [Main Menu]B[Record Set]B[Backup Rec]
and press the center of the set lever. (A Page 64)
(You can also press the user button that is assigned with
Backup Trig . (A Page 66))
● Backup recording into slot B starts. (The characters
BACKUP appear in red.)
● The card slot mark of slot B turns red (selected state), and
the status indicator of slot B also blinks in green.
Red
Red (selected state)
3
Start normal recording. (Normal recording in slot A)
● Press any of the [REC] buttons.
● Recording into the media in slot A starts. (The characters
REC appear in red.)
● The card icon of slot A turns red (unselected state), and the
status indicator of slot A also blinks in green.
Red (unselected state)
4
Stop normal recording.
● Press any of the [REC] buttons again.
● Recording to slot A stops, and the card slot mark of slot A
turns white (unselected state).
● The characters REC (red) changes back to STBY
(white).
● The status indicator of slot A goes out.
White (unselected state)
5
Stop backup recording.
● Select [STBY] in [Main Menu]B[Record Set]B[Backup Rec]
and press the center of the set lever. (A Page 64)
(You can also press the user button that is assigned with
Backup Trig or Rec Stop . (A Page 66))
● Recording to slot B stops, and the card slot mark of slot B
turns white (unselected state).
● The characters BACKUP changes back to white.
● The status indicator of slot B lights up in green.
White
Memo :
● During backup recording, if the space of one card runs
out, recording stops only for the card that is full.
● When recording to both slots is stopped, recording in the
Regen mode will be enabled for the card slot in which
recording started.
● When recording is started in the other slot while recording to
one slot, the clip being recorded is split and simultaneous
recording to the other card starts.
● When recording is stopped for either slot A or B while
recording to both slots, the clip on the slot which is still
recording is split.
● Although the clips are separated in this case, the clips can
be seamlessly joined by arranging them on the timeline of
the editing software since they are recorded seamlessly.
● Clip Cutter Trig cannot be performed during backup
recording. (A Page 41)
● When [Slot Mode] is set to Backup , [Rec Mode] can
only be set to Normal . (A Page 64)
Advertisement
Table of Contents
