Table of Contents
Advertisement
4
Repeat Frame Rec.
● Press the [REC] button again to record only the number of
frames specified in [Rec Frames] and pause.
● The status display changes from
STBYF B RECF B STBYF (yellow text).
● Frame Rec continues until the recording is stopped (step
5
Press and hold the [REC] button or press the user
button that is assigned with Rec Stop to stop the
recording. (A Page 19)
● The card slot status indicator lights up in green.
Interval Rec
In normal recording, when the recording stops, the image and
accompanying data from the start till the end of the recording
are recorded as one clip on the SDHC/SDXC card.
In this mode, recording and pause are performed repeatedly
at the specified time interval. Only the specfied number of
frames is recorded.
The recording can be written to the media as a single clip
until it is stopped.
Memo :
● Audio cannot be recorded.
● Until a specified amount of recordings is accumulated, the
file will not be written to the media.
● After the specified number of frames is recorded and written
to the media, recording will be performed until the same
number is accumulated again.
● If the specified amount is not reached when recording is
stopped, normal recording is performed and frames are
added to the ending of the clip until the amount is
reached. (Padding)
Press [REC]
(Interval Rec starts)
Recording resumes
Interval specified in
Interval specified in
[Rec Interval]
Pause
Pause
Recording of specified number of frames in [Rec Frames]
Actual clip recorded to media
Specified amount of data
1
Set [Rec Mode] to Interval Rec .
● Set [Main Menu]B[Record Set]B[Rec Mode] to Interval
Rec . (A Page 64)
● The status display changes from STBY B STBYI .
Press [REC]
(Interval Rec stops)
Recording resumes
[Rec Interval]
Normal recording
Pause
(Padding data)
2
Set the number of frames to record in [Rec Frames].
Set using [Main Menu]B[Record Set]B[Rec Frames].
(A Page 64)
3
Set the time interval to start recording in [Rec
5
).
Interval].
Set using [Main Menu]B[Record Set]B[Rec Interval].
(A Page 64)
4
Start recording.
● Press the [REC] button to record only the number of frames
specified in [Rec Frames] and pause.
● After the specified time in [Rec Interval] has passed,
recording starts again to record only the number of frames
specified in [Rec Frames] and pause.
● Interval Rec continues until the recording is stopped.
● The status display changes from
STBYI B RECI B STBYI (red text)
B RECI B STBYI (red text).
● The card slot status indicator blinks in green.
5
Press the [REC] button or the user button that is
assigned with Rec Stop to stop the recording.
● The card slot status indicator lights up in green.
● The status display is STBYI .
Advertisement
Table of Contents
