Section 2: Installation; Before Installation; Installation - Intellinet 523431 User Manual

Compatible OS: Windows 95/98/Me/NT/2000/XP, Mac OS, Linux or other UNIX
system
Note: Features and specifications are subject to change without notice.

2. INSTALLATION

2.1 Before Installation

• First, confirm that your computer has a Java Script-capable Web browser
installed.
• Make sure that your computer has a LAN card installed and correctly configured
for TCP/IP.
• If using xDSL, you will need the username and password provided by your ISP.
NOTE: If your computer has ADSL PPPoE dial-up software installed, back up your
installation software and uninstall your ADSL PPPoE dial-up software before
proceeding with the installation.
2.2 Installation
1. Set up the WAN connection: Connect the broadband RJ-45 cable (xDSL, Cable
modem or LAN/leased cable) with the WAN port of the router.
2. Set up the LAN connection: Connect your computer's LAN card port or your
switch's UPLINK port with one LAN port of the router using a common network
cable. NOTE: All LAN ports of the router can automatically sense cross cable, so
straight-through or cross cable can be used to connect the LAN card or switch.
3. Turn on the power by pressing the power button on the back of the router. The
device will perform a self test. During the self test, the PWR LED, CPU LED,
Wireless LED and LAN port LEDs of connected ports are lit. After the self test, the
CPU LED starts flashing (on-off-on-off).
4. Start the computer.
6