VESTEL EVC01 Series User Manual
Electric vehicle charger
Hide thumbs
Also See for EVC01 Series:
- Installation manuallines (77 pages) ,
- Quick start manual (29 pages)
Subscribe to Our Youtube Channel
Related Manuals for VESTEL EVC01 Series
Summary of Contents for VESTEL EVC01 Series
- Page 1 ELECTRIC VEHICLE CHARGER EVC01 Ser�es User Manual © 2024 VESTEL MOBILITY - All rights reserved English - 1...
-
Page 2: Table Of Contents
5.2.1 - VEHICLE CONNECTION & CHARGING ...........20 5.2.2 - STOP CHARGING ................21 5.2.3 - OCPP 1.6 JSON ADDITIONAL FEATURES ..........22 5.2.3.1 - RESERVATION FEATURE ............22 5.2.3.2 - REMOTE CHARGE INITIATION / TERMINATION ......22 © 2024 VESTEL MOBILITY - All rights reserved English - 1... - Page 3 6.1 - GENERAL ERROR CONDITIONS ...............23 6.2 - OTHER ERROR CONDITIONS .................23 6.3 - DC 6mA LEAKAGE CURRENT SENSOR BEHAVIOR ..........24 7 - CLEANING AND MAINTENANCE ................24 © 2024 VESTEL MOBILITY - All rights reserved English - 2...
-
Page 4: Safety Information
• Do not touch the terminals, the electric vehicle connector and other hazardous live parts of the charging station with sharp metal objects. © 2024 VESTEL MOBILITY - All rights reserved English - 3... -
Page 5: Grounding Warnings
In order to avoid the risk of fire or electric shock, do not use the device with extension cords. To avoid danger, if the mains cable or vehicle cable is damaged, it must be replaced by the manufacturer, its service agent or by similarly qualified persons. © 2024 VESTEL MOBILITY - All rights reserved English - 4... -
Page 6: Warning For Wall Installation
2.1 - INTRODUCTION TO THE PRODUCT COMPONENTS EVC01 Product Components Branding Area RFID Card Reader LED Status Indicator Cable Hook Charging Plug Charging Cable Supply inlet cable gland Communication cable gland Charging cable gland © 2024 VESTEL MOBILITY - All rights reserved English - 5... -
Page 7: Led Status Indicator Information
1 sec Blinks green for User RFID Card addition to local RFID list 2 times Twice Blinks red for 2 User RFID card removes from local RFID times list Twice © 2024 VESTEL MOBILITY - All rights reserved English - 6... - Page 8 Three Times Blinks Green for Charging Station is waiting for 1 secs Randomised Delay Period. 1 sec Constant Yellow Altered Firmware Blinking Yellow Tamper switch is activated 3 sec © 2024 VESTEL MOBILITY - All rights reserved English - 7...
-
Page 9: Description
T2P : Type2 Charging Cable with 5m T2P7 : Type2 Charging Cable with 7m 5th Asterisk (*) can be one of the following: WHT : w/White Cosmetic Cover Cabinet EVC01 © 2024 VESTEL MOBILITY - All rights reserved English - 8... -
Page 10: Technical Specification
WCDMA : B1 (2100 MHz), B8 (900 MHz) LTE : B1 (2100 MHz), B3 (1800 MHz), B7 (2600 MHz), B8 (900 MHz), B20 (800 MHz), B28A (700 MHz) RFID Reader ISO 14443A/B and ISO 15693 © 2024 VESTEL MOBILITY - All rights reserved English - 9... -
Page 11: Other Features
Ingress Protection IP54 Impact Protection IK08,IK10 Usage Conditions Temperature -25 °C to +50 °C (without direct sunlight) Humidity 5% - 95% (relative humidity, without condensation) Altitude 0 - 3,000m © 2024 VESTEL MOBILITY - All rights reserved English - 10... -
Page 12: Charging
Ensure that your vehicle and the station are Insert the charging plug into the vehicle ready for charging. socket. No LED Indication No LED Indication Charging starts automatically, and LED Status Indicator glows in blue. © 2024 VESTEL MOBILITY - All rights reserved English - 11... -
Page 13: Stop Charging
RFID cards, the loader goes into autostart mode. NOTE : If you delete the last RFID card from the local RFID card list, then your charger starts to behave as autostart (plug&charge) mode. © 2024 VESTEL MOBILITY - All rights reserved English - 12... -
Page 14: Vehicle Connection & Charging
Charging starts and LED status indicator glows in blue. NOTE: Charging session will be rejected if an authorised RFID card is used. Charging will only begin with an authorised RFID card. © 2024 VESTEL MOBILITY - All rights reserved English - 13... -
Page 15: Stop Charging
RFID card that was used to start the unplugging the charging cable from the vehicle. charging session. No LED Indication Carefully coil charging cable and place on accessory hook. No LED Indication © 2024 VESTEL MOBILITY - All rights reserved English - 14... -
Page 16: Smart Application Authorized Mode
Internet remotely, you need to configure Internet connection settings of your EV charger from “Connectivity” tab in “Device Settings” menu. You can either use Ethernet LAN connectivity or WiFi WLAN connectivity option. © 2024 VESTEL MOBILITY - All rights reserved English - 15... -
Page 17: Vehicle Connection & Charging
NOTE: Charging operation is rejected by the charging station when you want to start charging with an unauthorized card. It takes around one minute to reboot your charging station after it resets. © 2024 VESTEL MOBILITY - All rights reserved English - 16... -
Page 18: Stop Charging
RFID card that you have started “STOP” button in mobile application in your charging before. smartphone. Method 3. You may stop charging by unplugging the charging from the vehicle first. No LED Indication © 2024 VESTEL MOBILITY - All rights reserved English - 17... -
Page 19: Rfid Local List Authorized Mode & Accept All Rfids Mode
NOTE : Charging operation is rejected by the charging station when you want to start charging with an unauthorized card. It takes around one minute to reboot your charging station after it resets. © 2024 VESTEL MOBILITY - All rights reserved English - 18... -
Page 20: Stop Charging
RFID card that you have started the charging cable from the vehicle. charging before. No LED Indication Insert the charging plug to the charging plug holder of the station. No LED Indication © 2024 VESTEL MOBILITY - All rights reserved English - 19... -
Page 21: Ocpp Connected Mode
Charging starts and LED status indicator glows in blue. NOTE : Charging session will be rejected if an authorised RFID card is used. Charging will only begin with an authorised RFID card. © 2024 VESTEL MOBILITY - All rights reserved English - 20... -
Page 22: Stop Charging
RFID card that was used to start the unplugging the charging cable from the vehicle. charging session. No LED Indication Carefully coil charging cable and place on accessory hook. No LED Indication © 2024 VESTEL MOBILITY - All rights reserved English - 21... -
Page 23: Ocpp 1.6 Json Additional Features
If the electric vehicle charging station does not work properly, the service provider can restart the device using this function. There are two types of restart. Software or hardware reset can be selected. © 2024 VESTEL MOBILITY - All rights reserved English - 22... -
Page 24: Error And Fault Conditions
10 metres. Stay within range. NOTE: if a Wi-Fi connection problem occurs and the charger cannot be controlled, restart the router and check the connections. © 2024 VESTEL MOBILITY - All rights reserved English - 23... -
Page 25: Dc 6Ma Leakage Current Sensor Behavior
Do not use abrasive cloths and cleaning agents. We recommend to use a microfibre cloth. Failure to observe these warnings can lead to death and serious injury. In addition, it can cause damage to the device. © 2024 VESTEL MOBILITY - All rights reserved English - 24... - Page 26 © 2024 VESTEL MOBILITY - All rights reserved English - 25...
Need help?
Do you have a question about the EVC01 Series and is the answer not in the manual?
Questions and answers