Connecting To A Network - HP Vectra XU6 User Manual

Connecting to a Network

You PC has either a 100Base-T LAN interface adapter or a 100VG LAN
interface adapter. Both LAN adapters support 10Base-T.
The LAN Adapters support both 10 Mbit/s and 100 Mbit/s operation.
They automatically detect which network type is being used.
1 Connect the RJ-45 plug on your network cable to the LAN connector
on the LAN Adapter. Push the plug into the connector until the plug
clicks into place.
2 Attach the other end of the LAN cable to a hub (or into a wall jack
that is connected to a hub).
Let your Network Administrator know you are connecting your PC
to the network. Refer to the online Network Administrator Guide
(provided with the driver kit) for instructions on setting up your PC
for a LAN connection.
1 Setting Up Your PC
Connecting to a Network
Base-T Interface
VG Interface (B model)
5