Grounding Instructions - Modine Manufacturing MEQ15A01 Installation, Operation And Maintenance Manual

WARNING
This heater is for use on 240 Volts. The cord has a plug as shown in D in Figure 60.1. No adaptor is available for this for
this blade configuration, and none should be used. The type of outlet is a 240 volt grounding outlet. When properly
installed, it provides a ground connection through the cord to the heater to protect the operator from electric shock.
NOTE: This heater may be hard wired by a licenced electrician per NEC or Local codes. To hard wire, a licenced
electrician may remove the plug and hard wire the heater to a properly grounded junction box.
WARNING
Due to ongoing product improvements, specifications and dimensions are subject to change and correction without notice and without
incurring obligations. Determining the application and suitability for use of any product is the responsibility of the installer. Additionally,
the installer is responsible for verifying dimensional data on the actual product prior to beginning any installation preparations.
Incentive and rebate programs have precise requirements as to product performance and certification. All products meet applicable
regulations in effect on date of manufacture; however, certifications are not necessarily granted for the life of a product. Therefore, it is
the responsibility of the applicant to determine whether a specific model qualifies for these incentive/rebate programs.
Manual Revision: A1: 2023-11-01
5 -

GROUNDING INSTRUCTIONS

Connection to GFCI protected outlet is recommended for outdoor, exposed
environments and/or as required by local, state and National Electrical Code
(NEC) requirements.
FAILURE TO USE A GFCI PROTECTED OUTLET COULD RESULT IN FIRE OR
ELECTRIC SHOCK!
Modification of the supplied cord for hardwire purpose may only be completed
by CERTIFIED ELECTRICIANS, and modification must satisfy local and NEC
requirements. Incorrect modifications could result in electric shock or fire!
14