Modine Manufacturing MEQ15A01 Installation, Operation And Maintenance Manual page 18

WARNING: PERSONAL INJURY HAZARD - CLEANING AND MAINTENANCE
•
To avoid property damage, personal injury
or death due to electrical shock DO NOT
service the unit without turning the unit
OFF and disconnecting the heater from the
main power supply.
•
This product must be installed by a certified
electrician and must adhere to all local,
state and national electric codes (NEC)
•
This product is not suitable for indoor
residential use
installation is acceptable)
•
Do not direct the radiant part of the heater
towards the ceiling.
•
Specified minimum clearances from front,
sides, bottom and back of unit must be met.
Failure to meet clearance minimums can
result in fire.
•
Heater is not for use in bathrooms, laundry
areas or other locations where unit could fall
into water.
•
Do not use the heater if it has been dropped
or damaged in any way. Ensure the emitter is
WARNING: INSTALLATION
(Indoor commercial
SAVE THESE INSTRUCTIONS
•
Before cleaning the unit or replacing the
emitter, turn off the main power. Make sure
the heater and/or the emitter is cool before
handling.
•
Service must be performed only by a
qualified service technician.
not cracked or chipped visually. Contact an
authorized Modine dealer for support.
•
Do not use the heater if the power cord is
damaged. Contact an authorized servicer or
qualified electrician to replace the cord prior
to use.
•
Unplug the appliance when it is not in use for
long periods of time, or for cleaning and
maintenance.
•
Heater is not to be recessed.
•
The heater must be installed at level on a
flat, stable surface, rigid enough to safely
withstand the weight of the heater and the
heater must not be covered by any flexible
material, such as carpets, plastic or fabric.
4