Modine Manufacturing MEQ15A01 Installation, Operation And Maintenance Manual page 39

2.5 ADJUSTING DIRECTIONAL POSITIONING
WARNING
1. Turn off the heaters electrical supply line from the main power supply.
2. Allow the heater to cool before adjusting the angle.
3. Loosen the fixing bolts on the brackets at the back of the heater; adjust the heater as desired, then re-
tighten the fixing bolts.
Notice : The unit produces radiant heat that warms people and objects rather than the air around them. Install
the heater at an angle which points the reflector at the target space. Do not point the heater at windows or vacant
spaces, as the heat will not be delivered to the occupants.
Never attempt to move or adjust the heater angle while it is running. Personal
injury could result.
INCORRECT
CORRECT
9