Installing The Sound Board Driver - HP Kayak XA Installation Manual

1 Installing Your Multimedia Sound Kit
Installing the Accessory Software Under OS/2 Warp

Installing the Sound Board Driver

The driver software for the sound board is on your HP Multimedia
Sound CD.
If you already have OS/2 Warp installed with any embedded audio
driver on your system, you must uninstall the Multimedia Software
Support under OS/2, and then reinstall the Multimedia Software
Support. To do this:
Uninstalling any
1 With OS/2 running, double-click on the OS/2 System folder and then
Embedded Audio
Drivers
2 Double-click on the Selective Uninstall program.
3 Click on the box next to Multimedia Software Support, and then click
4 Click on the OK button, and then click on the Yes button.
5 At the confirmation message, click on the OK button and then the
6 Shut down and restart the PC. (If an error message appears when
7 Double-click on the OS/2 System folder and then double-click on the
8 Double-click on the Selective Install folder.
9 Click on the icon next to the Multimedia Device Support option.
10 Click on the << Remove button to remove any audio drivers that are
11 Click on the OK button. The System Configuration screen re-
12 Click on the OK button, and make sure Multimedia Software Support
13 Click on the Install button. Follow the instructions that appear on the
14 Restart the PC.
14 English
double-click on the System Setup folder.
on the Uninstall button.
Cancel button.
you restart the PC, see "Troubleshooting" on page 16.)
System Setup folder.
in the right-hand-side window.
appears. Check that None is selected under Multimedia Device
Support.
is selected.
screen.