Setting Automatic Standby Or Hibernation Mode - HP Compaq Presario,Presario 8000 Getting Started

Setting Automatic Standby or
Hibernation Mode
1. Click Start on the taskbar.
2. Click Control Panel.
3. Click Performance and Maintenance, if
it is present.
4. Double-click Power Options.
5. Click the Hibernate tab. The hibernation
check box should be checked. Click to check,
if necessary, and then click Apply.
6. Click the Power Schemes tab.
7. Select a power scheme from the drop-down list
in the Power Schemes box.
Getting Started
8. Choose the settings:
❏ To turn on auto-standby for the PC, click a
time (such as After 20 mins) in the
System standby list.
❏ To set the timer for auto-hibernation, click
the time to elapse before hibernation (such
as After 1 hour) in the System hibernates
list.
If both standby and hibernation timers
are set, the system hibernation timer
must be set for a longer time than the
system standby timer.
9. Click Apply, and then click OK.
Using the PC
3–45