HP Compaq Presario,Presario 8000 Getting Started page 85

12. The PC starts the recovery; wait for the
onscreen instructions to display, and then
follow those instructions.
❏ For standard recovery, press R, and then
press R again. Click Next to proceed with
the non-destructive system recovery. Click
Yes to start the recovery. Insert the
remaining CDs when directed.
Or
❏ For full system recovery, press R, and then
press F. Click Yes to perform a full system
recovery. Insert the remaining CDs when
directed.
Or
❏ If your PC hard disk drive is blank or
corrupted, press R to perform a full system
recovery. Insert the remaining CDs when
directed.
Getting Started
Using Application Recovery and System Recovery
13. When the recovery program finishes, click
Restart to restart the PC.
14. Before the PC restarts, the CD tray ejects.
Remove the CD.
15. Return the BIOS to the original setting. During
the startup when the black screen with the
Compaq logo appears, press the F1 key on
the keyboard until Entering SETUP appears.
(You have only a few seconds to press the F1
key before the normal setup process
continues.) Wait until the BIOS setup program
opens.
16. Press the right arrow key to select Boot.
17. Press the down arrow key to select Boot
Device Priority, and then press Enter on the
keyboard.
6–11