Reassembling The Pc - HP Compaq Presario,Presario 8000 Getting Started

Upgrading the PC

Reassembling the PC

1. Replace the front bezel by following the
method appropriate for your PC model.
❏ To replace the front bezel on the S series,
position the chassis in the upright position.
At an angle, align the top of the front bezel
with the top slots of the chassis 1 so that
the front bezel hooks onto the chassis, and
then press the bottom end of the bezel to
the chassis until it snaps into place 2.
8–26
Replacing the front bezel on the S series
1
2
Getting Started