HP Compaq Presario,Presario 8000 Getting Started page 120

Upgrading the PC
Removing the PC access panel on the 8000 series
8. Remove the front bezel by following the
appropriate method for your PC model.
8–4
❏ To remove the front bezel from the S series
model, gently pry the top section 1 of the
bezel away from the chassis. On the inside
of the front bezel, press the center two tabs
(not the bottom tabs) to release the bezel,
and then pull it from the chassis 2.
Removing the front bezel from the S series
1
2
Getting Started