Automatic Standby Or Hibernation Mode - HP Pavilion a210 Quick Start Manual

Automatic standby
or hibernation mode
To automatically put the PC into standby
or hibernation mode, modify the power
management settings:
1 Click Start on the taskbar.
2 Click Control Panel.
3 Click Performance and Maintenance,
if it is present.
4 Double-click Power Options.
5 Check if the auto-hibernation feature is
enabled by clicking the Hibernate tab
and seeing if a tick mark is in the Enable
hibernation tick box. If necessary, enable
the feature by clicking the tick box so that a
tick appears in it.
44
HP Pavilion home PC
6 If you changed the Enable hibernation tick
box, click Apply.
7 Click the Power Schemes tab to set the
timers for standby and/or hibernation. In the
Power Schemes box, select a power scheme
from the drop-down list. Choose the timers:
To turn on auto-standby for the PC, click a
■
time (such as After 20 mins) in the System
standby list.
To set the timer for auto-hibernation, click the
■
time to elapse before hibernation (such as
After 1 hour) in the System hibernates list.
Note:
If both standby and hibernation timers are set,
the system hibernation timer must be set for a
longer time than the system standby timer.
8 Click OK.