To Install The Module Bay Adapter - HP OmniBook 900 User Manual

Omnibook docking system

Hide thumbs Also See for OmniBook 900:

Table of Contents

Installing Accessories

To install the module bay adapter

You will need a medium-sized Phillips screwdriver to install your module adapter.

1. Undock the OmniBook.

2. Disconnect all cables connected to the rear of the dock.

3. Disconnect the power cord from the dock.

4. Remove the Kensington lock, if attached.

5. Remove the dock tray, if installed.

6. Remove the five screws securing the top cover to the base.

1-40

Table of Contents

Omnibook 900b 900