Docking And Undocking; Connecting To The Ac Adapter - HP 2400 User Manual

2

Docking and undocking

Connecting to the AC adapter

The docking station requires AC power for full functionality of all ports.
WARNING!
Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect the power from the product by unplugging the power cord from the AC outlet.
If provided with a 3-pin attachment plug on your power cord, plug the cord into a grounded (earthed) 3-
pin outlet. Do not disable the power cord grounding pin; for example, by attaching a 2-pin adapter. The
grounding pin is an important safety feature.
Do not place anything on power cords or cables. Arrange them so that no one can accidentally step on
or trip over them.
Do not pull on a cord or cable. When unplugging a cord from the AC outlet, grasp the cord by the plug.
WARNING!
operate the computer and docking station with a voltage converter kit sold for appliances. Use only the
power cord included with the docking station.
To connect the docking station to AC power:
1. Plug the AC adapter into the power connector (1) on the docking station.
2. Plug the power cord into the AC adapter (2).
3. Plug the other end of the power cord into an AC outlet (3).
The power light (4) on the rear of the docking station is turned on.
ENWW
To reduce the risk of electric shock or damage to your equipment:
To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to
Connecting to the AC adapter 5