Using The Module Bay Adapter - HP OmniBook 900 User Manual

Using the Module Bay Adapter

The optional module bay adapter lets you use OmniBook plug-in IDE modules such
as CD-ROM drives, LS-120 drives, or DVD drives with your dock. This section
describes how to:
Install the module adapter in the plug-in module bay.
Install and remove plug-in modules.
There is a module adapter for each OmniBook model supported by the dock. The
module bay adapter must be purchased separately. To use the plug-in modules for
your OmniBook, install the module adapter for that OmniBook.
For information on module bay adapters, see your reseller or the HP OmniBook
website at www.hp.com/omnibook. For more information on plug-in modules, refer
to the manual that accompanied the plug-in modules, the OmniBook Reference
Guide, or the HP OmniBook website.
Installing Accessories
1-39