Multibay Devices; Removing Multibay Devices - Compaq Armada E700 Series Maintenance And Service Manual

5.7 MultiBay Devices

Removing MultiBay Devices

1. Save all work, exit all applications, and shut down the computer.
2. Remove the media (diskettes, CD-ROMs, etc.) from the drive. Ensure that the
CD tray is closed.
3. Tilt the computer at an angle
(Figure 5-20).
4. To remove a device from the top MultiBay, slide the rear MultiBay release latch
toward the front of the computer
5. To remove a device from the bottom MultiBay or to remove a device that occupies
both MultiBays, slide the front MultiBay release latch
computer.
6. Grasp the device using the recess
Figure 5-20. Removing a Device from the MultiBays
If you are not inserting another device or a battery pack into the MultiBay, insert the
MultiBay weight saver included with the computer.
5-22 Removal and Replacement Procedures
so the bottom of the computer is accessible
1
.
2
beneath the MultiBay and remove the device.
4
toward the back of the
3