Compaq Armada E700 Series Maintenance And Service Manual page 77

2. Tilt the computer at an angle
(Figure 5-8).
3. Slide the front MultiBay release latch
4. Grasp the MultiBay battery pack using the recess
remove the MultiBay battery pack.
Figure 5-8. Removing a MultiBay Battery Pack
Removing a Dual-MultiBay Battery Pack
1. If the computer is turned on, the battery bay does not contain a charged battery pack,
and the system is not connected to external power, initiate Suspend (Standby) by
pressing the suspend button.
NOTE: Extensive drive activity may delay Suspend (Standby). The computer screen
clears and the power/suspend light begins to flash when Suspend (Standby) is
initiated.
If the computer is turned off or in Suspend or Hibernation, proceed to Step 2.
5-10 Removal and Replacement Procedures
so the bottom of the computer is accessible
1
toward the back of the computer.
2
beneath the battery bay and
3