File Menu; Security Menu - Compaq Armada E700 Series Maintenance And Service Manual

File Menu

Begin here
System information
Save to floppy
Restore from floppy
Restore defaults
Ignore changes and exit
Save changes and exit

Security Menu

Begin here
Setup password
Power-On password
Password options
DriveLock passwords
Device security
System IDs
2-8 Troubleshooting
To do this
I View identification information about the
computer, docking base, and battery
packs.
I View specification information about the
processor, memory and cache size, and
ROM date and family.
Save system configuration to a diskette.
Restore system configuration from a
diskette. (The diskette contains your
personal configuration, so you should
restore from the diskette before using the
System Recovery CD-ROM.)
Replace configuration settings in Computer
Setup with factory default settings.
(Identification information is retained.)
Cancel changes entered during the current
Computer Setup session, then exit and
restart the computer.
Save changes, then exit and restart the
computer.
To do this
Enter, change, or delete a setup password.
Enter, change, or delete a power-on
password.
Enable/disable:
I QuickLock/QuickBlank.
I
Lock keyboard and pointing stick or
touchpad at startup.
(These features can be enabled only when
a power-on password is set.)
Enter, change, or delete a DriveLock
password.
Enable/disable
I
Ports or diskette drives.
I
Diskette write.
I CD-ROM or diskette startup.
NOTE: Settings for a DVD-ROM can be
entered in the CD-ROM field.
Enter identification numbers for the
computer, a docking base, and
battery packs.