Compaq Armada E700 Series Maintenance And Service Manual page 128

24. Remove the five screws
base assembly (Figure 5-56).
25. Slide and hold the battery pack release lever toward the front of the computer.
26. Lift the front edge of the system board
clears the base assembly, lift the board straight up and out of the base assembly
Figure 5-56. Removing the System Board
Reverse the above procedure to install the
been replaced in the base enclosure, remove the short screws installed in Step 22 and
reverse the disassembly steps to install the system board.
and the standoff that secure the system board to the
1 2
. When the front edge of the system board
3
system board
. After the system board has
Remove and Replacement Procedures
.
4
5-61