Related Manuals for Satel abax 2 APT-210
Summary of Contents for Satel abax 2 APT-210
- Page 1 Bidirectional keyfob APT-210 Firmware version 1.02 apt-210_en 05/24 SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND tel. +48 58 320 94 00 www.satel.pl...
- Page 2 (the device was placed on the market after 13 August 2005). SATEL aims to continually improve the quality of its products, which may result in changes in their technical specifications and software. Current information about the changes being introduced is available on our website.
-
Page 3: Table Of Contents
CONTENTS Features ........................... 2 Description ........................2 Control ........................2 ACU-220 controller ........................2 ABAX 2 / ABAX controller connected to INTEGRA / INTEGRA Plus control panel ....3 INTEGRA 128-WRL control panel .................... 3 ABAX 2 / ABAX controller connected to VERSA / VERSA Plus / VERSA IP control panel ... 3 ABAX 2 controller connected to PERFECTA 64 M control panel .......... -
Page 4: Features
APT-210 SATEL The APT-210 keyfob allows you to remotely control the alarm system or automation devices. It is designed for operation within the ABAX 2 / ABAX two-way wireless system. The keyfob is supported by: • ABAX 2: − ACU-220 / ACU-280 controller (firmware version 6.08 or newer), •... -
Page 5: Abax 2 / Abax Controller Connected To Integra / Integra Plus Control Panel
SATEL APT-210 The keyfob user can control the ACU-220 controller outputs. The five buttons make it possible to control six outputs (to control the sixth output, press the [1 and 2] buttons simultaneously). Pressing the keyfob button(s) will turn on the output for a preset time or toggle the output to its opposite state. -
Page 6: System State Information
APT-210 SATEL type for the zone. For more information, refer to the ABAX 2 controller manual and the PERFECTA 64 M control panel manuals. 2.2 System state information To get the system state information, press any button (it needn't start any function). - Page 7 SATEL APT-210 The used batteries must not be discarded, but should be disposed of in accordance with the existing rules for environment protection. The battery life depends on how the keyfob is used. The more frequently the buttons are pressed, the faster the battery drains. Fig. 2 shows how to replace the battery.
-
Page 8: Specifications
APT-210 SATEL • the control panel will indicate trouble (if the keyfob is registered in the ABAX 2 / ABAX controller, which is connected to the INTEGRA / INTEGRA Plus / VERSA / VERSA Plus / VERSA IP / PERFECTA 64 M control panel, or in the INTEGRA 128-WRL control panel).
Need help?
Do you have a question about the abax 2 APT-210 and is the answer not in the manual?
Questions and answers