System Introduction - Bosch PROSPERO PRP-CST Installation Manual

PROSPERO
3

System introduction

The PROSPERO system is a public address system based on TCP/IP technology released by
Bosch. All components of the system can be directly connected to a standard Ethernet
network and transmit audio and control signals directly through the network.
PROSPERO system has excellent scalability and flexibility, call stations and interface
modules and other components support PoE power supply, which is suitable for both
centralized system layout and distributed system topology requirements.
PROSPERO system also has excellent compatibility and can be used with various types of
amplifiers and loudspeakers in Bosch's public address product line, so as to build a
broadcasting and background music solution that meets the needs of various applications.
The PROSPERO system is not only cost-effective with excellent sound quality, but also easy
to install, integrate and use. In addition to conventional public address applications. In
addition, the design is optimized for applications and scenarios in the education industry,
including IP active speakers that can meet the needs of applications in the classroom. For
detailed information on product and system descriptions/software configurations, refer to
the Bosch PROSPERO Public Address System Product Data Sheet and Software
Configuration Manual.
Figure 3.1: Example of a typical application setup of the system
Bosch Security Systems B.V.
Installation manual
System introduction | en
2024-10 | V1.00 | F.01U.429.436
9