Safety Information - Bosch PROSPERO PRP-CST Installation Manual

PROSPERO
1

Safety information

1.
2.
3.
i
!
4.
5.
6.
7.
8.
9.
10. Amplifier outputs marked with
11. The system may receive power from multiple mains power outlet sockets and backup
Bosch Security Systems B.V.
Read and keep these safety instructions. Follow all instructions and heed all warnings.
Download the latest version of the applicable installation manual from
www.boschsecurity.com for installation instructions.
Information
Refer to the Installation Manual for instructions.
Follow all installation instructions and observe the following alert signs:
Notice! Containing additional information. Usually, not observing a notice does not
result in damage to the equipment or personal injuries.
Caution! The equipment or the property can be damaged, or persons can be injured
if the alert is not observed.
Warning! Risk of electric shock.
System installation and servicing by qualified personnel only, in accordance with
applicable local codes. No user-serviceable parts inside.
For rack-mounting of system devices, make sure that the equipment rack is of suitable
quality to support the weight of the devices. Use caution when moving a rack to avoid
injury from tip over.
The apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
Warning! To reduce the risk of fire and electric shock, do not expose this apparatus
to rain or moisture.
Mains powered equipment shall be connected to a mains power outlet socket with a
protective earthing connection. An external, readily operable, mains plug or all‑pole
mains switch shall be installed.
Only replace the mains fuse of an apparatus with a fuse of the same type.
The protective ground connection of an apparatus shall be connected to protective
ground before the apparatus is connected to a power supply.
Touching uninsulated terminals or wiring may result in an unpleasant sensation.
Amplifier outputs marked with
It requires a skilled person to strip and connect the loudspeaker wires in such a way
that the naked conductors are inaccessible.
batteries.
Warning! To prevent a shock hazard disconnect all power sources prior to
system installation.
may carry audio output voltages up to 120 V
or may carry audio output voltages above 120 V
Installation manual
Safety information | en
.
RMS
2024-10 | V1.00 | F.01U.429.436
5
.
RMS