Table of contents | en Table of contents Safety Short information Equipment overview Front view Rear view Accessories Installation Delivery conditions Installation method Wiring Operation Maintenance Technical data Dimensions Bosch Security Systems B.V. 2024-10 | V1.00 | F.01U.429.436 User manual...
13. Use only the accessories/fittings specified by the manufacturer. Installation of any equipment should follow the manufacturer's instructions and should utilize the manufacturer's recommended mounting accessories. 2024-10 | V1.00 | F.01U.429.436 Bosch Security Systems B.V. User manual...
Page 5
To avoid electric shock, do not open the housing. Consult only qualified service personnel regarding maintenance matters. Warning! To prevent fire or electric shock hazard, do not expose the device to rain or moisture. Bosch Security Systems B.V. 2024-10 | V1.00 | F.01U.429.436 User manual...
Page 6
Telephone Network Voltage (TNV) circuits. The LAN port contains a SELV circuit and the WAN port contains a TNV circuit. Some LAN and WAN ports use RJ-45 connectors. Always be careful when connecting cables. 2024-10 | V1.00 | F.01U.429.436 Bosch Security Systems B.V. User manual...
System equipment failure log view. – PIN code login authentication access control. – 1 Line-in audio input for connecting audio sources. – Power supply status and fault status indicators. Bosch Security Systems B.V. 2024-10 | V1.00 | F.01U.429.436 User manual...
Restore factory default settings Strain relief bracket Secure the alignment of the network cable so that it adheres to the bottom of the call station Footrest Non-slip foot pads Bosch Security Systems B.V. 2024-10 | V1.00 | F.01U.429.436 User manual...
| Accessories PROSPERO Accessories Quantity Components Call station Safety and user information leaflet Strain relief bracket and screws 2024-10 | V1.00 | F.01U.429.436 Bosch Security Systems B.V. User manual...
192.168.1.6 Name PRP-CST Installation method Refer to the diagram below to connect the call station's network cable and secure it with the provided strain relief bracket and two screws. Bosch Security Systems B.V. 2024-10 | V1.00 | F.01U.429.436 User manual...
The following figure shows the interface definition of the stereo plug (3.5 mm, "mini three-prong plug") used to connect to the analog audio input interface. 2024-10 | V1.00 | F.01U.429.436 Bosch Security Systems B.V. User manual...
Device reset Press and hold the device reset button for 5 seconds, then release it to reboot and restore to the factory default settings. Bosch Security Systems B.V. 2024-10 | V1.00 | F.01U.429.436 User manual...
Page 14
| Operation PROSPERO Icon Indicator and control Description Device reset button Restore factory default settings 2024-10 | V1.00 | F.01U.429.436 Bosch Security Systems B.V. User manual...
Maintenance | en Maintenance The call station does not require any special maintenance. To maintain cleanliness and a neat appearance, use a soft cloth to clean the call station. Bosch Security Systems B.V. 2024-10 | V1.00 | F.01U.429.436 User manual...
75 dB SPL +/- 6 dB Frequency range (-10 dB) (Hz) 500 Hz — 3 kHz Analog audio input Frequency response 100 Hz — 18 kHz Sampling rate 44.1 kHz Type 1x Line level input Connector 1x 3.5 mm socket 2024-10 | V1.00 | F.01U.429.436 Bosch Security Systems B.V. User manual...
Page 17
Weight 740 g Color (RAL) RAL 9017 Traffic black Environmental Operating temperature (°C) -5°C — 45°C Storage and transportation temperature (°C) -40°C — 70 C Operating relative humidity, non-condensing <95% (%%) Bosch Security Systems B.V. 2024-10 | V1.00 | F.01U.429.436 User manual...
Need help?
Do you have a question about the PROSPERO PRP-CST and is the answer not in the manual?
Questions and answers